I retain the copyright to all of the Peptu related code but grant permission for it to be used, free of cost, for all non commercial use.
If any person or company wishes to use any part of the code in a commercial application they must seek my approval first and I reserve
the right to levy a charge appropriate to its use.
At this point in time I am not prepared to release the source code for this project. If you REALLy, REALLY want it you will have
to try to convince me that I should let you have a copy, but, without a very compelling reason for requiring it, you may find that
difficult to achieve.
All that is required is to use the download menu to download the hex file (by selecting 'PIC Code') and then program it into a 20 Mhz PIC 16F873.
However it should be noted that the PIC software contains default values for the hardware and MUST be be set to meet the individual module
settings, port to be used and boot options when the module is installed. This is achieved by running the
Peptu.exe (PC based software).